Xpert™ Sideshoot X-ray Inspection System

Xpert™ Sideshoot X-ray Inspection System

 

BRIEF INTRODUCTION

The Thermo Scientific Xpert S400 side shoot x-ray inspection system offers many of the same capabilities as the POWERx S family in a lower power, easier to use and more cost effective design. It comes standard with a wide x-ray beam and detector and is available in straight or curtainless chicane line configurations.

TECHNICAL SPECIFICATIONS

  • Aperture Width and Height: See beam coverage drawing . Wide aperture model available (275 mm/10.8 in).
  • Belt Speed Range: 5m/min to 80m/min (16ft/min to 263ft/min), built-in VFD optional to control conveyor speed
  • Conveyor Heights Available (conveyor optional): 750mm to 1050mm (29.5in to 41.3in)
  • Minimum Product Gap: 10mm (0.4in), required for x-ray acquisition and accurate rejection
  • Safety/Security Features: X-ray power key, emergency stops, radiation curtains, LED X-ray imminent/on lights, all doors equipped with magnetic interlocks
  • Human Machine Interface (HMI): 15-inch diagonal touchscreen with protective cover
  • Operating Temperature: +5°C to +40°C (+41°F to +104°F)
  • Machine Cooling: Built-in 2560 BTU (750 W) cabinet airconditioner
  • Electrical Input: 190 to 240 VAC, 50/60 Hz, 20-amp service
  • Digital Outputs: 4 available (one reserved for a rejection device)
  • USB Port: 2.0, watertight port on outside of machine
  • Intrusion Protection Rating: IP 54 or IP65

Enquire about Xpert™ Sideshoot X-ray Inspection System

Feedback Form
close slider